Check Price List of DIN 2605-1 Elbow & DIN 2605 Stainless Steel Elbow Standard
Elbows are part of the pipe fitting components. There are different types of elbows such as DIN 2605 Elbow Type 3 and the DIN 2605 Elbow Type 2 which are used for different purposes and in different applications. Rajveer Stainless And Alloys is a manufacturer and supplier of all kinds of different elbows and other fittings. We are in the business for long time now serving our customers with the right product with better quality and pricing. The DIN 2605 Stainless Steel Elbow belongs to seamless and welded elbow standards. The pressure rating of the elbow has to match the pressure rating of the pipe system it is fitted with.
DIN 2605 Elbow Type 3 and DIN 2605 Elbow Type 2 Manufacturers
The use of elbow is primarily to change the flow of direction. The DIN 2605-1 Elbow is used in oil and gas industries, oil refineries and in petrochemical industries. The Bend DIN 2605-1 can be replaced for elbows when the application requirement permits. The elbows could be of two major different angles, 45 degrees and 90 degrees. The elbows could also be of one of two major radius types; the short radius and the long radius. The short radius elbows are used in places where the space is narrow and the pressure is low. The long radius elbows are used to reduce the pressure stress. You can contact us for further information on the Elbow DIN 2605 types and prices.
|Outside diameter:||1/2 inch to 8 inch (14,0mm -219,1mm)|
|Types of elbow:||2D, 3D, 5D, long radius, short radius - 3D, 5D, 2D, long radius, long radius|
|Standard specification:||EN10253 Typ A and B, DIN 2605 Part 1 and 2, ASME B16.9, production according to customer specification.|
|Wall thickness:||from 1 mm to 50 mm, depending on the outside diameter|
|Angle:||from 7° to 180°, depending on the outside diameter, pipe elbows, return bends|
|Welding bevel:||according to EN9692-1, DIN2559, ASME B16.25, EN10253, according to technical drawing|
- Musical instruments
- Offshore applications
- Aerospace applications
- Onshore applications
- Heat exchangers
- Chemical plant equipment
- High pressure applications
The main difference is the radius. Elbows are pipe fittings that are used to connect two pipes together. They also change the direction of a pipeline at connection. There are short radius elbows and long radius elbows. The degree of change is usually 45 or 90 with custom elbows available as well. The type 2 elbow has a 1D radius, meaning, the radius of the elbow is 1 times the outer diameter of the pipe. The type 3 elbow has a radius that is 1.5 times the outer diameter of the pipe. These types are used in different flow rates. When the turn has to be smooth, extended radius of elbows is useful.