DIN 2617 Pipe End Cap Dimensions & Sizes
Pipe fittings are essential parts of piping. Rajveer Stainless and Alloys is in the business of stainless steel pipes and fittings for several years now. We produce different standards and specifications of pipes and fittings. The DIN 2617 is the most widely used pipe fitting standards. The fittings in this specification are made up of steel with more than 18% chromium and 8% nickel in the composition. The DIN 2617 Pipe Cap Dimensions vary, starting from 213mm in diameter, 20 mm in wall thickness and 0.06kg in weight all the way up to 5080mm in diameter as well.
The End Cap DIN 2617 is used in pressure piping systems to close the connection at one end. The Cap DIN 2617 has to be strong and stress resistant to withstand the pressure at the installation site. The DIN 2617 Dimensions differ according to the piping system they are used at. Also, there are different types within the standard. The Cap DIN 2617-c is one of the most used types in this standard. The DIN 2617 Pipe Cap also has to have high temperature resistance because the caps are used in medium to high temperature services. The applications include oil and gas industries, petrochemical industries and domestic applications as well. Please contact us for further details and pricing.
|Specification||DIN 2617-2 & DIN 2617-1.
ASME B16.9, EN10253 Typ A and B
|Dimensions Standard||ANSI B16.5, MSS SP44, ANSI B16.47, ANSI B16.28, ANSI B16.48, ANSI B16.36|
|Value Added Services||Machining / Sand Blasting / Draw / Galavanizing / Heat Treatment / Expansion / Shot Blasting|
|Outer Diameter & Wall Thickness Size||1/2" NB To 60" NB (Nominal Bore Size)
Wall Thickness: from 1 mm to 100 mm
|Shapes||Hemispherical, Oval, Square, I shape, U shape, Rectangular|
|Make Process||Forged, Rolled, Machining|
|Delivery Conditions||Normalized and Tempered / Quenched and Tempered - BR / N / Q /T, As Rolled, Thermomechanical Rolled / Formed, Machined, Normalizing Formed, Normalizing Rolled|
|End Caps - DIN 2617|
|Outside diameter||Wall thickness||Height||Weight|
- Wall Thickness: sch10-80s
- Out diameter: 1/2"-60" DN15-DN1500
- Max. wall thickness: 200mm
- Pressure: SCH5 to SCH160v
- Hemispherical Cap
- Oval Cap
- Rectangular Cap
- U shape Cap
- I shape Cap
- Square Cap
The end cap is a blind end of a connection. The end caps are used at the end of a pipe to terminate the fluid flow. Lubricants and adhesives are used in installing the end caps. Different material grades and different sizes require different types of lubricants and adhesives. The end of the pipe is cleaned and dried out under air or with air blowing tools. The end cap is also cleaned. Then the lubricant and or adhesive is applied onto the outer side of the pipe and the inner side of the cap. Then the cap is put in place and tightened.