Puddle Flange

View GI Puddle Flange Dimensions & Mild Steel Puddle Flange Standard

Rajveer Stainless And Alloys is manufacturer and supplier of flanges. Flanges are used for fitting pipes together in most cases. Different materials are used for the production of flanges and there are different kinds of flanges. The puddle flanges are one special case of flanges that are used to drive pipes through concrete structures and underground. The Puddle Flange Pipe Sleeve is inserted into walls, underground or constructions structures to allow the piping later on. The flanges are used to seal the connection water tight to make sure of the maintenance free operation as long as possible. The flanges could be coated or galvanized. The Gi Puddle Flange Price List of ours is competitive to the market and we sell the flanges at reasonable pricing.

Stainless Steel Puddle Flange

Stainless Steel Pipe Puddle Flange & Puddle Flange Pipe Sleeve Manufacturer in India

There are different sizes of the flanges as well. The MS Puddle Flange Dimensions vary from 32mm to 1300mm in diameter. Piping could be done through the walls and concrete structures with the Stainless Steel Pipe Puddle Flange which is much cost efficient than piping around the obstacles. Our Stainless Steel Puddle Flange Price is lower and compatible to the customers’ budget. Also our flange products are tested and produced under international standards to cope up with the application requirements. The uses of the Mild Steel Puddle Flange are seen in water lines, domestic applications, gas lines and in petrochemical industries. Please contact us for further details on the product and prices.


Puddle Flange Standard Specification

ASME B16.5 Puddle Flanges Size Chart 1/2" to 48"
Puddle Flanges Standards ASME/ANSI B16.5/16.36/16.47A/16.47B, EN-1092, DIN, MSS S44, ANSI/ASME B16.5,B16.48, BS4504, BS 10, API7S-43, API605, ISO70051, JISB2220, BS1560-3.1, B16.47 Series A & B, API7S-15, EN1092
GI Puddle Flange Pressure Rating ANSI 1500 LBS, Class 150, Class 900, 2500 LBS, 300#, 600 LBS
Carbon Steel Puddle Flange Pressure Calculation in DIN 10Bar 40Bar 16Bar 6Bar 25Bar / PN64 PN16 PN40 PN6 PN25 PN10
Mild Steel Puddle Flange JIS 16 K, 20 K, 5K, 40 K, 63 K, 10 K, 30 K
Stainless Steel Puddle Flange UNI 16Bar 6Bar 40Bar 10Bar 25Bar
GI Puddle Flanges EN 25Bar 6Bar 40Bar 16Bar 10Bar
Copper Nickel Puddle Flange Coating Zinc Plated, Cold and Hot Dip Galvanized, Anti-rust Paint, Oil Black Paint, Yellow Transparent
Most common types of Puddle Flanges Threaded / Screwed / Forged / Plate
Production technique of Carbon Alloys Puddle Flange
  • Heat treated, Forged and machined
Both Side Puddle Flange Connect Type/ Flange Face Type Ring Type Joint, Raised Face, Flat Face, Large Male-Female, Large Tongue & Groove, Lap-Joint Face, Small Tongue, Groove, Small Male-Female
Threaded Puddle Flange Equipment Bending machine, Pushing Machine, Press machine, Sand-blasting machine, electric bevelling machine
Puddle Flange Sizes Range
  • 1/2" - 72"
  • 21.30 MM - 1828.80 MM
Type of  Puddle Flange
  • Threaded Puddle Flange
  • Both side Puddle Flange
  • Sleeve Puddle Flange
  • One side Puddle Flange
Hot Dip Galvanizing(Hot Dip GI)
  • Hot Dip GI 80 - 120 % Zink
  • GI 80 - 120 Micron
  • Hot Dip GI 120 - 160 % Zink.
  • GI 120 - 160 Micron


Puddle Flange Pipe Sleeve Application Industries

  • Suitable for use with all smooth walled pipes provided that the pipe surface, at the point of installation, is clean, smooth and free of pores or surface imperfections
  • Most pipe sizes can be accommodated from 32mm through to 1200mm and above
  • Installed on pipes during construction where water penetration has to be prevented
  • Domestic and commercial developments


Manufacturing Standards of Mild Steel Puddle Flange

  • ASME B16.5 :Flanged Fittings & Pipe Flanges
  • MSS SP-6 : Standard Finishes for Contact Faces of Connecting End Flanges and Pipe Flanges of Fittings & Valves
  • ASME B16.47 : Large Diameter Steel Flanges NPS26 - NPS60
  • ASTM A182 – ASME SA182 : Specification Standard for Wrought Austenitic SS Piping Fittings
  • ASME B16.36 : Spectacle Blind Flanges

Difference between ms puddle flange and gi puddle flange

Puddle flanges are used in plumping and other applications to make a water tight connection. The puddle flange comes in as a pair and the both parts are welded together to create a sealed connection. MS stands for mild steel. For plumping applications, high end steels are not required so the MS puddle flanges are used in plumping applications. The GI puddle flanges are galvanized iron flanges. The galvanized iron flanges are ferritic but to avoid corrosion, they have a galvanization on the surface. So the MS flanges and GI flanges could be used interchangeably with the application’s requirements.